

QC passed
- Glossiness
- High-gloss
- Full drying time
- 5 - 8 hours
- Surface drying time
- 3 - 4 hours
Product description
This is a two-component epoxy-polyamide sealer that is applied directly onto concrete surfaces as an undercoat and offers high chemical resistance.
Important Painting Instructions:
- This paint must be spray-applied to surfaces that have been cleaned in accordance with the relevant surface preparation standards.
- Adding too much or too little hardener will adversely affect the paint properties.
- The paint and hardener mixture must be allowed to stand for 30 minutes before application.
- As the pot life of the paint and hardener mixture is limited, avoid mixing more material than is required for 8 hours of painting.
- The surface temperature must be at least 5°C above the dew point. Depending on the working environment, the temperature of the paint and hardener mixture must be equal to or no more than 4°C higher than the surface temperature.









